Considering the significance of printed circuit boards in electronic machines, it is crucial to find a reliable and experienced manufacturer who knows the dos and don’ts well when producing and installing the items. With so many PCB electronics startups striving to claim the top spot in the race, it’s hard to choose one to work with. Not only should you pay attention to your work procedure, but you should also pay attention to the experience and knowledge of your teams, as they will be responsible for carrying out the plans on site. Therefore, they must be trained and equipped with all the tools, techniques, and knowledge, regardless of the obstacles or problems that arise throughout the process.
Printed circuit boards, or PCBs, physically support and electrically link a series of electronic components into a circuit for reliability and inexpensive mass assembly. Companies often hire PCB assembly fabricators to make new devices or technical products. This article focuses on PCB manufacturing companies in Malaysia, and we will guide you about reliable service providers in this regard. Here is the list of the top PCB manufacturers in Malaysia:
List of Leading PCB Assembly Manufacturer - EMS Factory in Malaysia
1. AR Dynamic Technology Sdn. Bhd.
AR Dynamic Technology Sdn. Bhd. is a small-scale electronics contract manufacturer providing PCB assembly services located in Sungai Petani, Kedah, Malaysia.
R Dynamic Technology is a Licensed Warehouse Manufacturing (LMW) company. And it has a total of about 15,000 sqft area with about 13,000 sqft built-up area.
They Provide manufacturing services:
- Surface mounting technology (SMT)
- Auto inspection, axial and radial
- Wave soldering
- Chip on board (COB)
- Turn-key PCB Assembly
AT present, their customers are from Germany, US, and Malaysia.
Address: Plot 19-8, Jalan PKNK 1/4, Eastern Industrial Park, 08000 Sungai Petani, Kedah, Malaysia.
2. BCM Electronics Corporation Sdn. Bhd
BCM Electronics Corporation is a medium size world class Electronics Manufacturing Service provider with more than 20 years of experience in the industry and specializing in high mixed-low volume product.
The company provides SMT & box build services to MNC’s worldwide, some of whom have been with the company since its inception in 1993.
The products we manufacture includes RF Communications, Power Electronics, Oil & Gas, Automotive and Lightings.
Located in Kulim Hi Tech Park Kulim Kedah Malaysia, BCM’s manufacturing site is 436,000 Sq ft large with a buildup area of 203,000 Sq ft. with over 1200 employee.
What makes BCM Electronics Corporation Sdn. Bhd differentiates itself from other manufacturers in its multi-step evaluation process that ensures each product meets the thermal and electrical requirements per IPC specifications. Furthermore, BCM Electronics Corporation treats each project with great care and attention. They start by looking at all aspects, especially field application engineering where they used to do spec reviews to list technical details and explain everything to the workforce based on delegated jobs. The company’s wide range of electronic technologies or areas of expertise include:
- New Production Inspection
- Supply Chain Management
- Test System development
- Surface Mount Technology
- Thru Hole PCB Assembly
BCM offers our services as a One-Stop Turnkey Solution, from Development, components Sourcing, and NPI to Manufacturing and shipments to customers.
- High Mix Low Volume
- Box Build
- Turnkey and Consign Business Model
- Flexible Schedule
- Proto and NPI support
- Further Processing
- Lean Manufacturing
Address: Plot 21, Jalan Hi-Tech 4, Kulim Hi-Tech Park, Phase 1, 09090 Kulim, Kedah, MALAYSIA
3. BH Electronics Sdn. Bhd. (BHE)
BH Electronics Sdn. Bhd. (BHE) is a pioneer and leading manufacturer of wire harnesses in Penang and Northern Malaysia. As an OEM, BH has been providing a one-stop solution to our clients for Wire Harnesses Assemblies, PCB Assemblies, and Box Builds for customers in Malaysia and South-East Asia, both large and small.
BH provides complete turnkey solutions involving printed circuit board (PCB) assemblies, box builds, and wire harness assemblies. It provides quick-turn prototypes and production PCB assembly with surface-mount (SMT), through-hole (THT), and mix components, and it also can handle the small quantity and volume productions.
Technology Capabilities of BHE:
- SMT & THT
- Lead-Free/Leaded Process Capabilities
- Wire bonding and encapsulation
- BGA Repair/Rework Capability
- Chip On Board/Flex (COB)
- PCB layer count up to 24 layers
- Electro-Mechanical & Box-Build Assembly
- Ultrasonic cleaning
BH adopts a variety of testing methodologies to ensure the assembled boards are functional prior to shipping. They are:
- Basic Quality Test: visual inspection.
- X-ray Inspection: tests for BGAs, QFN, and bare PCBs.
- AOI Checks: tests for solder paste, 0201 components, missing components, and polarity.
- ICT (In-Circuit Test) / Functional test: according to the customer’s testing procedures.
Address: 232, Lebuh Kampung Jawa, Free Industrial Zone, Phase 3, Bayan Lepas. Penang. Malaysia.
4. Ban Seng Lee Industries BHD
Ban Seng Lee Industries Sdn. Bhd. was established in 1978 to meet the growing demand for metal components from Japanese clients.
Started PCB assembly business in 1999. Their in-house facilities for PCB Assembly cover Auto-Insertion machines (AV, RH, JV, and SMT) and Manual Insertion lines. It has nearly 20 units of AV, RH, and JV types of machines, 8 SMT lines, and 8 manual insertion lines. Their operation is fully air-conditioned and with anti-static flooring.
Address: (390939-T) Lot 4212, Persimpangan Jalan Batu Arang/Lebuhraya PLUS, 48000 Rawang, Selangor Darul Ehsan, Malaysia.
5. Seki Aoi Techno
Established in 2015, Seki Aoi Techno (Malaysia) Sdn Bhd (initially founded in Tokyo, Japan) is the leading global PCB assembly manufacturer in Malaysia with an excellent track record and reputation in producing multifunction printed circuit boards.
Seki Aoi Techno is a Japanese-based PCB manufacturer in Malaysia well-known for its industry-leading printed circuit board assembly, mounting, soldering, and manufacturing services and technology.
As one of the top manufacturers of the industry-leading PCB assembly and soldering services in Malaysia, their comprehensive suite of high-quality PCB assembly services means you need not involve yourself in the painstaking job of sourcing or mounting components to a fully designed and manufactured printed circuit board.
Address: NO 3, Jalan Nobat 6, Taman Perindustrian Bukit Rambai, 75250 Melaka
6. Broad Avenue Industries Sdn.Bhd.
Broad Avenue Industries Sdn.Bhd. provides PCB design and manufacturing services:
- Electronics Circuits Design
- PCB Design
- PCB Fabrication
- PCB Assembly
- PCB Repair and Rebuild service
- Full turnkey service – PCB, components, and productions
The company’s strength lies in our ability to run small and medium lots production effectively, at a competitive cost, and quick turnaround time.
- PCB Fabrications
- Small volume PCB production and Assembly
- Prototype PCB Productions
- PCB Design
- PCB Assembly – SMD & Through Holes
- Solder Paste Stencil
- Volume PCB productions
The customers include:
- R&D Companies
- Design House
- Colleges & Universities
Broad Avenue Industries Sdn.Bhd. provides PCB assembly and testing service using high speed SMT and through hole assembly machine. Their testers include Automatic Optical Inspection (AOI) and In Circuit Tester (ICT).
Broad Avenue Industries Sdn.Bhd. has many years experience in handling complex and low to medium volume production.
Their capabilities includes mounting fine pitch QFP IC, SOIC, standard SMD components and through hole components.
And they can provide full turnkey service from PCB supply to components procurement and board assembly
Address: 15B, Jalan Anggerik Aranda C 31/C, Kota Kemuning, 40460 Shah Alam, Selangor, Malaysia.
7. EASTOOL INDUSTRIES SDN. BHD
EASTOOL INDUSTRIES SDN. BHD is an EMS (Electronics Manufacturing Services) Solution Provider with services extended from Printer Circuit Board Assembly (PCBA), Medical Assembly with Cleanroom facilities to Complete Box Build Turnkey Solutions. EasyTOOL was established in 1993 as a subsidiary company of Japan-based GROP Co. Ltd.
Its experience and expertise in Electronics Contract Manufacturing have lent them successful business partnerships with multi-national corporations that are prominent manufacturers of hi-tech electronic equipment and household electronic appliances.
They are committed to achieving product quality, and cost-efficiency and realizing our delivery promise to their customers.
To become the leading one-stop solution provider in Printer Circuit Board Assembly (PCBA) and OEM Solution Provider in Malaysia and expand globally to achieve worldwide international recognition.
From circuit boards that can assemble from as small as 0201 chips fine-pitch BGA to 100mm connectors, they can cater to multiple ranges of requirements. After all, with the capability of more than 10 SMT lines (with more room for expansion if required) to cater to more than 100 million mounting points per month, they are empowered with the flexibility to meet customers’ varied needs.
Their new plant is equipped with Class 10K Cleanroom Standard & Facilities, which is accredited with ISO13485 Medical Certification, enabling them to move into the Medical Assembly era.
Address: No 6, 7 & 8, Jalan Gangsa 3, Desa Perindustrian Kulai 2, Kelapa Sawit, 81030 Kulai, Johor, Malaysia.
8. EG Industries Berhad
With over 20 years of operating history, EG Industries Berhad has become one of the world’s leading Electronic Manufacturing Services (EMS) and Vertical Integration providers.
Through its two most significant subsidiaries SMT Technologies Sdn Bhd in Malaysia and SMT Industries Co., Ltd in Thailand, the company specializes in the provision of electronic manufacturing services (“EMS”) for world-renowned brand names of electrical and electronic products.
SMT TECHNOLOGIES SDN BHD (MALAYSIA) Provision of EMS for computer peripherals and consumer electronic/electrical products industries.
Address: Plot 102 & 102A, Bakar Arang Industrial Estate 08000 Sungai Petani, Kedah Malaysia
9. ELID Electronic Manufacturing Services
ELID, founded in 1989 as a manufacturer of access control systems, has emerged as international security and intelligent application provider and one of the trusted and well-respected names the security industry. With manufacturing facilities located in Petaling Jaya, Malaysia, ELID offers complete Electronic Manufacturing Services using SMD Assembly machines and a dedicated, experienced personnel team. They specialize in manufacturing processes where the customer requirements are small to mid-volume electronic assemblies and finished products.
ELID offers everything from simple consignment assemblies to full turnkey solutions. It can provide quick-turn prototypess, low-volume production, and PCB assembly with surface-mount (SMT) and through-hole (THT) processes. It also caters to full turn-key projects, offering comprehensive options for parts & components sourcing to help customers reduce waiting time and their costs. Consignments are also accepted.
Services & Capabilities
- Sourcing and supply of quick-turn / prototype Printed Circuit Board(PCB) at Competitive prices from single, double to 4-layer PCB.
- PCB design and drawing
- Global Material Procurement
- Through-hole process, Including Reflow Soldering
- Surface Mount Technology, Including Screen Printing
Address: No 19, Jln 51A/223, Sek 51A, 4600 Petaling Jaya, Selangor.
JHYPCB is an electronic contract manufacturer with 11 years of experience in China, specializing in PCB prototying, PCB production, prototype PCB assembly, and high-volume PCB assembly services.
- ISO9001/ISO14001 facilities
- Quick prototyping within 24 hours
- The on-time delivery rate of 99.5%
- High quality, high timeliness, lifetime services
In addition to being equipped with high-speed and high-precision equipment, their employees have an average of more than 10 years of SMT experience, and have got rich experience in the solder paste printing time, printing pressure, demolding speed, cleaning times, solder paste thickness, placement machine throw rate, nozzle paste assembly capacity, reflow soldering temperature, post-furnace inspection, AOI debugging inspection, programming procedure, BGA inspection, and tin thickness inspection.
PCB assembly service supplies to Malaysia by JHYPCB
- Quick Turn PCB Assembly Service
- Low-cost PCB Assembly Service
- Surface Mount Technology Service
- Through Hole PCB Assembly Service
- Manual Soldering Service
- Turnkey PCB Assembly Service
- Flexible PCB Assembly Service
- BGA PCB Assembly Service
- LED PCB Assembly Service
- Mixed Technology PCB Assembly Service
Address: Building 15, Wan Xia Industrial Park, Tongfuyu Industrial Zone, Shajing,Baoan District, Shenzhen, China